Aftersales Service

03444 995599

Can’t see your model? Visit our Advice Centre

All 3 icons flashing? The dust container is not fitted correctly

Should all three lights be illuminated on the display panel then check the duct container is fitted securely. Try and re fit it and push it home until your hear it click into place.

Read more

Should all three lights be illuminated on the display panel then check the duct container is fitted securely. Try and re fit it and push it home until your hear it click into place.

Phone 03446 923 608 and we’ll assess the best resolution for your problem.

Always disconnect your appliance from the mains before you start examining it!

Did you find this useful?

Something went wrong. Please try again.

Thank you!

This solution applies to the following models:

Vacuum Cleaners

Empty the dust container

If the 'empty bin' warning light is flashing the dust container is full and needs to be emptied out.

Read more

If the 'empty bin' warning light is flashing the dust container is full and needs to be emptied out.

empty the dust box alarm

Unclip the dust box from the product and take it to your dustbin for emptying. Press the release catch at the rear of the product and lift the container off the main body.

Place the dirt container over your dust bin and open the flap at the bottom by pressing the release catch. The compressed dirt will fall out - shake the container to ensure all the dust collected falls out. Press the flap shut and re fit the dust container to the product ready for use.

press the release catch to open the flap, the dirt will drop out of the container

Phone 03446 923 608 and we’ll assess the best resolution for your problem.

Always disconnect your appliance from the mains before you start examining it!

Did you find this useful?

Something went wrong. Please try again.

Thank you!

This solution applies to the following models:

Vacuum Cleaners

Check the compactor ram is not jammed

Your Synthesis cleaner compacts the dirt into the dust box with a ram which means you don't have to empty the dust box as many times as with conventional vacuum cleaners. From time to time debris may get caught in the ram and the warning light will let you know that some routine cleaning is needed.

Read more

Your Synthesis cleaner compacts the dirt into the dust box with a ram which means you don't have to empty the dust box as many times as with conventional vacuum cleaners. From time to time debris may get caught in the ram and the warning light will let you know that some routine cleaning is needed.

If this alarm light is lit then it is simple to fix. The ram , known as the 'Auger' is part of the compacting system located inside the dust container so start by releasing the container from the product.

Take the dust box to your dustbin and open the flap at the bottom of the container to let the dirt drop out into your dustbin.

press the release flap to empty the container

The container can be opened up by twisting the lid so that the arrow points to the open padlock symbol and pulling the lid off the container body.

line the arrow up with the open padlock as shown

Now clean the blades of the compactor along with the mesh filter and the plunger by removing any debris tangled around the mechanism.

cleaning the compactor

Once everything has been cleaned re assemble the unit and twist the cap round so that the arrow lines up with the locked padlock. Re fit to the body of the products and you are ready to start cleaning.

Phone 03446 923 608 and we’ll assess the best resolution for your problem.

Always disconnect your appliance from the mains before you start examining it!

Did you find this useful?

Something went wrong. Please try again.

Thank you!

This solution applies to the following models:

Vacuum Cleaners