Keep the filter clean

Filter by model

Enter product code / model number

Can't see
your model?

Clean the filter after the dust box has been emptied five times

After the dust box has been emptied five times the filter found in the bottom of the box should be removed and cleaned. Take out the dust box and empty it out over your dust bin, the filter will swivel out by pulling on the right hand side to swing it out:

remove the dust box

                                                                                                                                      pull the filter from this side

                                            now remove the filter for cleaning

Dust the filter with a brush or if it is very dirty wash in warm water, make sure it's thoroughly dry before re fitting it into robocom. Hoover recommend you replace the filter after three washes, new filters can be purchased from the spares section of our website.

Buy spare parts online
Phone 03446 923 608 to book your repair

Always disconnect your appliance from the mains before you start examining it!

Did you find this useful?

This solution applies to the following models:

Vacuum Cleaners

Our website uses cookies. Cookies enable us to provide the best experience possible and help us understand how customers use our website. Our site won't work without them. By continuing to use our website you accept our use of cookies. Find out more about cookies.


Locating Appliance Information Plates

Hoover typical model number plate
Appliance information plates can be found on the front, back, side, rim or base of Hoover appliances.
Washing Machine
Washer Dryer
Single Oven
Double Oven