Letter 'F' appears in the display

Filter by model

Enter product code / model number

Can't see
your model?

Clean or replace the filters

Should a letter 'F' appear in the display it is a warning that the filters in the hood need cleaning or replacing with new ones. The grease filters may be washed in hot water. These filters clean and purify the air and if they become clogged or dirty the hood will not work well.

The grease filters are found underneath the hood and look like a metal mesh. Remove and wash them in hot water. If you are using your hood in recirculation mode (as shown in the diagram) then the charcoal filters fitted may need to be replaced. These can be purchased from the spares section of our website. Once all filters have been cleaned or replaced please switch the hood off at the mains for a few minutes to re set the error warning letter 'F'

Buy spare parts online
Phone 03446 923 608 to book your repair

Always disconnect your appliance from the mains before you start examining it!

Average rating
Did you find this useful?

Our website uses cookies. Cookies enable us to provide the best experience possible and help us understand how customers use our website. Our site won't work without them. By continuing to use our website you accept our use of cookies. Find out more about cookies.


Locating Appliance Information Plates

Hoover typical model number plate
Appliance information plates can be found on the front, back, side, rim or base of Hoover appliances.
Washing Machine
Washer Dryer
Single Oven
Double Oven