Aftersales Service

03444 995599

Empty the dust container and clean the filters

To keep your Curve vacuum in good working order and to prevent it from overheating and cutting out we recommend you regularly clean your filters and dust box. There are 2 filters on the product firstly take the dust container off by releasing the clip on the carry handle. Place the container over your dust bin and press the ‘easy empty’ button to release the flap to empty the contents of the dust box

Lift dust box out

 Now twist the lid of the dust box anti clockwise to line the arrow up with the open padlock icon (pic) Remove the hepa filter and wash in warm water. The inside unit may also be removed by pulling it up with the silver hook once removed wash in warm water (pic)

 

Empty dust container Filters

The second filter can be found under a cover situated under where the dust box fits:Lift the cover off and wash this filter in warm water.

 

Exhaust filter

Please don’t use any detergent to wash the filters and dry out thoroughly before putting them back together this usually takes 24 hours. Filters will require regular replacement. Should you require replacement filters you can purchase them via the spares section of this website.

Phone 03446 923 608 and we’ll assess the best resolution for your problem.

Always disconnect your appliance from the mains before you start examining it!

This solution applies to the following models: