Regular cleaning of the filters fitted to the vacuum cleaner is essential to keep it working efficiently. There are three filters fitted to this vacuum, one at the rear and two inside the dust box. Remove the dust container and twist off the lid to get two of the  filters out. In here you will find a blue hepa filter and a grey plastic mesh.

There is an exhaust filter at the back of the product, unclip the cover to remove this filter.

Regular dusting with a brush will remove dust build up but with average usage the filters should be washed in warm water once per month to remove embedded particles of dust. Please make sure that everything has dried thoroughly before putting it all back together. Hoover recommend that for maximum suction power you replace the two blue filters once per year. New ones can be ordered through the spares section of this website.

Regular cleaning of the 2 sets of filters fitted to your Breeze vacuum will ensure it works efficiently with good suction power. The exhaust filter is fitted at the rear of the product. Remove by unclipping the cover and lifting it out.

There are also two filters that are fitted into the lid of the dust container. Remove the dust box and twist the lid anti- clockwise to get the filters out.

All filters can be dusted with a brush or washed in warm water. Please make sure they are thoroughly dry before you put them back in the cleaner, this make take up to 24 hours.

Hoover recommend that you replace all three filters fitted to your Breeze cleaner once per year and these can be purchased from the spares section of this web site.

To ensure that your hood works effectively and keeps the cooking area smelling fresh then remove the grease filter and wash in hot water. This is situated in the visor and will either be made from a metal mesh or fabric sheet. The metal mesh will last for ever however the fibre type filters will require regular replacement. Should you require replacement filters you can purchase them via the spares section of this website.

There are two filters that can be found inside the dust container. These collect fine dust particles and regular cleaning will improve the performance of the cleaner. Start by lifting the dust container up at a slight angle to remove it from the cleaner. Take it to your waste bin, flip the lid catch to open the container and shake out the contents. Now twist the round filter anti clockwise to remove it The inner filter can be removed by again twisting anti clockwise and extracting it from the filter housing. Slide the foam pad off the filter and dust both with a soft brush to clean away the dirt and debris. For best results you can wash the filters and the dust container in warm water but please make sure they are fully dry before you put it all back together.

Hoover recommend that once a year you replace the filters, this will keep the cleaner working efficiently and new ones can be purchased from the spares section of this website.

There are 2 filters in the dirty water tank and for best results these should be cleaned and thoroughly dried after each cleaning operation

Lift out the filter as shown

in the centre of the picture is the rectangular motor filter

Wash the filters out in warm water and dry thoroughly before popping them back in the cleaner.