Aftersales Service

03444 995599

How to fit a new belt

Remove the locking bar

Turn the product over and remove the brush locking bar - Use a small flat blade screwdriver twist the locking screw anti clockwise remove the bar and lift out the brush as shown:

To remove the belt it is necessary to take the top cover off. Remove the 8 screws around the lover casing 2 of which are hidden behind the little front rollers. Prize out the 2 little wheels to get to the screw as shown:

Hood removed

note the belt shown here connected to the silver motor on the left of the picture

Remove the broken or worn belt and replace with a new belt.

Phone 03446 923 608 and we’ll assess the best resolution for your problem.

Always disconnect your appliance from the mains before you start examining it!

This solution applies to the following models: