Larger plates don't fit in the bottom basket

Filter by model

Enter product code / model number

Can't see
your model?

Move the top basket up

The top rack or basket of our range of dishwashers is designed to have 2 positions within the tub of the machine. This allows you to move it up a little so that the larger plates and pans will fit in the bottom basket without touching the spray arm.

Simply empty the top basket of dishes and cutlery, pull it out until it stops. The basket rolls out on little wheels that slide in a runner on either side of the basket. Twist the runner stop out wards on the end of each slider and you will find the basket will roll out of the machine. There are 2 sets of wheels each side of the basket, re fit the basket on the lower set of wheels and close the runner stops back to keep it in place.

On some of our products simply pull out the basket until it stops, take out any dishes then push it down firmly. You will then find it pops up to the higher setting.

basket now fitted on the lower set of runner wheels which raises its position in the tub .

Buy spare parts online
Phone 03446 923 608 to book your repair

Always disconnect your appliance from the mains before you start examining it!

Average rating
Did you find this useful?

This solution applies to the following models:


Our website uses cookies. Cookies enable us to provide the best experience possible and help us understand how customers use our website. Our site won't work without them. By continuing to use our website you accept our use of cookies. Find out more about cookies.


Locating Appliance Information Plates

Hoover typical model number plate
Appliance information plates can be found on the front, back, side, rim or base of Hoover appliances.
Washing Machine
Washer Dryer
Single Oven
Double Oven