Can’t see your model? Visit our Advice Centre

Keep the filter inside the tub clean

Under the lower basket you will find a filter. Its a good idea to take it out and clean it fairly regularly to keep your dishwasher working properly. You may find water is in the filter area, this is normal.

Average rating:

Read more

Under the lower basket you will find a filter. Its a good idea to take it out and clean it fairly regularly to keep your dishwasher working properly. You may find water is in the filter area, this is normal.

Twist the round section in the middle of the filter anti clockwise to lift it out. The mesh plate can be removed. Clean the filter in your sink with warm water and a mild detergent. Replace the filter and you machine is ready for use. Please play the video clip for more information.

Always disconnect your appliance from the mains before you start examining it!

Average rating:

Did you find this useful?

Something went wrong. Please try again.

Thank you!

This solution applies to the following models:

Dishwashers

Check the spray arms can spin freely

There are 2 spray arms in your dishwasher one under the top basket, the other under the lower basket. To rotate and spray water they will need to be kept free of food particles and cleaned regularly.

Average rating:

Read more

There are 2 spray arms in your dishwasher one under the top basket, the other under the lower basket. To rotate and spray water they will need to be kept free of food particles and cleaned regularly.

Twist anticlockwise to remove and flush out with warm water and a mild detergent in your kitchen sink making sure the spray jet holes are clear. Replace the arms and your dishwasher is ready for use. For further clarification please view our helpful video.

Always disconnect your appliance from the mains before you start examining it!

Average rating:

Did you find this useful?

Something went wrong. Please try again.

Thank you!

This solution applies to the following models:

Dishwashers

Check that the salt or the rinse aid hasn't run out

Make sure that there is salt in the container situated at the bottom of the machine, try topping it up or check the water hardness setting is correct? If you are in a hard water area the setting may need to be increased.

Average rating:

Read more

Make sure that there is salt in the container situated at the bottom of the machine, try topping it up or check the water hardness setting is correct? If you are in a hard water area the setting may need to be increased.

 

If there are streaks on your dishes check that you have added rinse aid to the dispenser in the door. Try and increase the dosage setting until you are happy with the results.

If you are using 'all in one' tablets and live in a hard water area, try adding some salt into the softener chamber. This will enhance the cleaning results in hard water areas.

Always disconnect your appliance from the mains before you start examining it!

Average rating:

Did you find this useful?

Something went wrong. Please try again.

Thank you!

This solution applies to the following models:

Dishwashers